Be that as it may, revive iOS-devices can be without
resorting to those skilled in the service center. There are four ways to solve
a problem with a broken Home button on the iPhone and iPad.
Method 1 :
Calibration programmatically
Sometimes the home button the iPhone and iPad becomes less
responsive - starts to work with some delay. If this is due to software
failure, you need to make the calibration procedure .
To do this, open any staffing application, such as weather
or stock. Then, press and hold the power button for iOS-device until the strip
off. Now you need to keep the Home as long as the bar is gone, and the running
application is unloaded from memory. After that Home button will work as
expected.
Method 2 : Adjust the
position of the dock connector
In situations where the Home button on the iPhone and iPad
does not respond to clicks, will help a little trick for which you will need a
standard 30-pin cable. First you need to put the plug into the iPhone, and then
put his finger under the plug and gently press it upward. After this will press
the Home. You can now remove the power cord and test the device.
Method 3 : Use a
spray WD-40.
Restore the worn-out machinery Home button on the iPhone and
iPad can with known among motorists spray WD-40. This tool is used in weapons
and aerospace, aviation, electromechanical industry.
Spray use in the home, eliminates squeaking doors, it can
lubricate bicycle parts, locks, etc. WD-40 will approach the case with the
iPhone - enough to splash the product on a dead button Home, then to 10.5 quick
clicks. Usually it comes to life and starts to respond to pressing.
Method 4 : The
software duplication
If the three previous methods did not work, apparently, the
button really broken and it requires the intervention of specialists. As long
as you do not return to the shop for repair, you can use the built-in OS
function of the iOS software duplication.
To do this, go to Settings -> General -> Accessibility
and turn on Assistive Touch , flick of a switch on top of the screen. Now press
the circle, which will appear on the screen and in the window that appears,
click on "Home." When you close the settings, you can at any time cause
this button to return to the main screen.
In this case, it is a temporary solution that will use the
iPhone and iPad, even with a broken button Home.
No comments:
Post a Comment